Flange material ASTM A694 F65 can be used for with for 1500 rating ?. As per MSS-SP-44 ,PT(pressure temperature) table is available only up 900 rating for material ASTM A694 F65 . I would like to know whether i can used 1500 rating with Flange material ASTM A694 F65 and which standard to be used for manufacturing.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Flange material ASTM A694 F65 can be used for 1500 rating?
- Thread starter ANTRIJ
- Start date
Hi RIJOANTONY,
ASTM A694 F65 can be used for 1500 rating. In Oil and Gas pipelines (onshore and offshore) this material is widely used even if not specified in B16.5.
Manufacturers are familiar with this material/rating.
For P/T requirements you can refer to ASME B16.5 Group 1.1 as a conservative approach.
Regards
ASTM A694 F65 can be used for 1500 rating. In Oil and Gas pipelines (onshore and offshore) this material is widely used even if not specified in B16.5.
Manufacturers are familiar with this material/rating.
For P/T requirements you can refer to ASME B16.5 Group 1.1 as a conservative approach.
Regards
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
- Locked
- Question