Flanges over 60"

[sks4338]

What flange do yoy use at sizes over 60"?

Related condition is as follows.
Service is process, not utility. The rating is CL 150.
Weld neck flange is required.

Maybe you use Taylor Forge Flange.
If you do use Taylor Forge Flange, where do you get dimensional data of the flange?

Bolt holes, DWG's...., etc.

 

[JJPellin]

I use a Babcock & Wilcox catalog for flanges larger than 60". This catalog has dimensional information for sizes up to 96". In this size range, they only have tables for class 125, 250 and 75 in weld neck. Unfortunately, I do not know of any electronic source of these tables.

 

[Shmulik]

http://www.texasflange.com/PrintCatalog.pdf

I hope this helps.