Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fluid Migration in Utility Trenches

Status
Not open for further replies.

SanEnr1

Civil/Environmental
Apr 29, 2002
22
I am doing research for a paper regarding fluids (either liquids or gasses) that follow utility trenches after construction is complete. I have seen groundwater follow porous stone bedding materials downgradient and volatiles follow the same type material upgradient where the fluid is then released into the environment.

If anyone has experience regarding this topic or has read other papers on the issue, I would like to hear the story of the problem and how it was resolved.

Thank you.
 
Replies continue below

Recommended for you

to stop the migration, a cut off wall has to be constructed in the trench. You can do this during construction with 'low density' fill or after backfilling using a cementious grout pumped in under pressure. what you are trying to do is either fill all the vooids in the soil for some undermined lenght of trench or place a concrete plug in the trech.
 
I've seen it with sufficient levels of water ingress that it has actually collapse a major drianage line (1500mm dia. RCP) over a period of 10 years due to high salt content in the soil.

No easy fix avaliable apart from upping the specs on the pipe or swapping to a material that doesnt reaction to the saline enviro.


regards

sc
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor