Mar 5, 2004 #1 frogsaregreen Mechanical Apr 11, 2003 16 The flyout design tree can be expanded and retracted by press the letter "c"
Mar 5, 2004 #2 SBaugh Mechanical Mar 6, 2001 6,685 Thanks for the Tip frogsaregreen! Regards, Scott Baugh, CSWP http://www.3dvisiontech.comhttp://www.scottjbaugh.com faq731-376
Thanks for the Tip frogsaregreen! Regards, Scott Baugh, CSWP http://www.3dvisiontech.comhttp://www.scottjbaugh.com faq731-376
Mar 5, 2004 #3 aamoroso Mechanical Mar 5, 2003 432 Try Clicking on the Expand (+) while hitting C on your keyboard, it compacts the scroll bar so you can scroll with the tree compacted.
Try Clicking on the Expand (+) while hitting C on your keyboard, it compacts the scroll bar so you can scroll with the tree compacted.
Mar 5, 2004 #4 aamoroso Mechanical Mar 5, 2003 432 Click and hold the LMB on expand while hitting C (sorry bout the last post).
![[borg2]](/data/assets/smilies/borg2.gif "[borg2] [borg2]")
