Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

foam in seal oil tank

Status
Not open for further replies.

rwv

Electrical
Sep 17, 2003
1
0
0
US
thread605-58867

Your main seal oil pump suction flange is leaking. Air is being drawn into tank do to the vacuum.(29")If you shutdown the main seal oil pump and run on the D.C back-up pump which bypasses the seal tank, you will be able to see air bubbles in vacumm tank sight glass. tighten flange and or replace gasket.One way to verify this is to pour a cup of oil over flange while looking at oil in tank bubbling will stop.
 
Replies continue below

Recommended for you

I'm going to take a guess that after six years the problem has either been fixed or isn't a problem any more.


----------------------------------
image.php

If we learn from our mistakes I'm getting a great education!
 
Status
Not open for further replies.
Back
Top