Font display wrong in NX 7.5.2

[josueadelima]

Hi everyone hope somebody could help me, all the fonts in the display are wrong, the autodimensions displays wrong to, its dificult to explain so I leave a screenshot, please help me Im desperate!!

 

[josueadelima]

Sorry the version is 7.5.0.32

 

[cowski]

Let me guess, you are using a system with integrated graphics rather than a Siemens certified graphics card?

reference: thread561-292137

www.nxjournaling.com

 

[josueadelima]

Yes you guess right, is an Intel G41 Express integrated graphics card, is there a solution for my problem? thanks for answer!

 

[josueadelima]

Sorry didnt click your link will try to update the driver, weird problem :S

 

[looslib]

If the graphics driver update does not fix your issue, you are out of luck until you buy a certified graphics card. Even that is not guaranteed to resolve the issue as Siemens does not certify graphics cards by themselves. They only certify complete workstations.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli

 

[josueadelima]

Well.. the driver didnt fix the problem, but thanks any way I will try to put more atention on this for my next computer. If anbody has the same problem when you need to read some numbers just change the line type of the dimension to dotted line an then the font fixes. But it has to be set manually every time -Pain in the a.. -

 

[looslib]

The cost of a certified computer is minimal compared to the cost of the software.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli

 

[Xwheelguy]

Wonder if it's any coincidence that the hardware isn't certified and an icon that resembles a popular torrent client showing on the taskbar?

Tim Flater
NX Designer
NX 7.5.4.4 MP8
WinXP Pro x64 SP2
Intel Xeon 2.53 GHz 6GB RAM
NVIDIA Quadro 4000 2GB

 

[josueadelima]

Wonder right!