FT&A information not transfering over into file conviersion like .stp

[ken132]

So im trying to save from a .catpart model to something similar like an .stp file extension. Problem that I'am having is all the FT&A infromation is not transfer over during this conversion process.

Any ideas??

 

[jackk]

"something similar like an .stp file extension" ???

What EXACTLY are you trying to convert to? Does it support FT&A data?

 

[ken132]

I'm trying to convert it into a .stp file extension. But I need to make all the FT&A gets transferd as well.

 

[jackk]

I never tried it myself, but it looks like you can export FT&A anotations to STEP according to the Dassault web site:

http://www.3ds.com/products/catia/portfolio/catia-v5/all-products/domain/Infrastructure/product/SXT/

 

[DBezaire]

I thought I might have gained this when I went to R20 (I have step ST1 and FTA license) but this is a Dassault add on. Ken, check your license type under tools --> options -- General - License

Regards,
Derek

Win XP64
R20/21, 3DVIA Composer 2012, ST R20
Dell T7400 16GB Ram
Quadro FX 4800 - 1.5GB