Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fuel Pumping

Status
Not open for further replies.

Truckdriver2

Mechanical
May 15, 2006
20
0
0
AU
If I wanted to pump fuel ashore from a supply boat at 10 Bar through a lay flat hose; what standards would I have to comply to?
 
Replies continue below

Recommended for you

.. depending on where you are in the world, and layout at site.

But is your hose actually compatible allowed and recommended for this type of fluid?

Else:

Mechanical, and equipment bound norms and rules.

Onboard ship rules.

Safety rules for handling the fuel as hazardous fluid, including toxic and flammabletotal and in given pipeline

Local and environmental rules...

And possibly quite a few others....

From 'outside' it would probably be near impossible to give and exact answer. For advice: producer or supplier of hose and fluid and local authorities.

On the other hand: fuel is pumped every day, althoug I believe, not very much in lay-flat hoses (?)....

 
Status
Not open for further replies.
Back
Top