Galling of SST 1

[proinwv2]

AT one time I had a series of publications from Carpenter, one of which dealt with the Galling of Stainless Steels. It described the performance of different combinations in contact.

I have no idea what happened to them.

Does anyone know if this publication is available anywhere, or even similiar publications?

Thanks!

Paul

http://www.ostand.com

 

[monkeydog]

Have you tried going to Carpenter's web site and looking for it?

 

[proinwv2]

Yes, I could not find it online.

Being it is the weekend, I cannot call until tomorrow. It is a shame in that many companies have stopped publishing on paper, but they did not put these valuable resources on line either.

But then, I am the one who lost his copies.....

Paul

http://www.ostand.com

 

[monkeydog]

proinwv2,

I saw some galling literature on the carpenter website,

http://www.cartech.com/techarticles.aspx?id=1832

This doesn't help?

 

[RPstress]

There's also some useful galling information in the Nitronic 60 brochure (quite few different combinations of alloys; it's not all about Nitronic 60).

http://www.hpalloy.com/alloys/brochures/Nitronic60book.pdf

 

[proinwv2]

monkeydog and RPstress

These are helpful. I quick read shows me that this is similar to what was in the pub. that I referenced.

I will also continue to try to collect (recollect) some of that information.

Thanks to both of you.

Paul

http://www.ostand.com

 

[strider6]

Galling resistance of stainless steels

http://www.bssa.org.uk/topics.php?article=12

http://www.bssa.org.uk/topics.php?sub_category=63

S

Corrosion Prevention & Corrosion Control

 

[proinwv2]

strider6

Thanks for the UK information.



Paul

http://www.ostand.com