Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

GD and T self study

Status
Not open for further replies.
RUSO

RUSO

Mechanical
Joined
Jul 12, 2002
Messages
29
Location
US
Is there a good book out there that can teach someone how to read, understand and measure geometric tolerancing???

I'm taking a class for CMM training but have unfortunenately, am not versed in the GD and T art.

Any help would be appreciated...Thanks..
 
Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

victor6397
  • Question Question
Plastic Collapse and ratcheting assessment locations
Replies
1
Views
2K
TGS4
TGS4
Karik87
  • Question Question
Combine thickness and diameter qualified range of welder according to ASME IX
Replies
4
Views
959
Karik87
Karik87
hugo50ml
  • Locked
  • Question Question
Concerns Regarding ASME Certification and Company Conduct
Replies
0
Views
2K
hugo50ml
hugo50ml
Samingme755
  • Locked
  • Question Question
Asme B16.47 series A and B
Replies
1
Views
3K
LittleInch
LittleInch
Khalid Hameed
  • Locked
  • Question Question
ASME B 31.3 and ASME B31.8
Replies
4
Views
2K
Khalid Hameed
Khalid Hameed

Part and Inventory Search

Sponsor

Back
Top