Jul 18, 2022 #1 breezy83 Mechanical Sep 22, 2020 16 Hi, I was hoping someone could tell me a reasonable value for a general profile tolerance for injection molded parts. Thanks!
Hi, I was hoping someone could tell me a reasonable value for a general profile tolerance for injection molded parts. Thanks!
Jul 18, 2022 #2 desertfox Mechanical Dec 29, 2002 5,560 Off the top of my head and depending what material is used I would say about +/- 0.004” “Do not worry about your problems with mathematics, I assure you mine are far greater.” Albert Einstein Upvote 0 Downvote
Off the top of my head and depending what material is used I would say about +/- 0.004” “Do not worry about your problems with mathematics, I assure you mine are far greater.” Albert Einstein
Jul 19, 2022 #3 drawoh Mechanical Oct 1, 2002 8,956 breezy83, Call your injection moulder. There is a very nice handbook out there that explains injection mouling tolerances. Look for SPI Standards & Practices of PlasticsMolders. -- JHG Upvote 0 Downvote
breezy83, Call your injection moulder. There is a very nice handbook out there that explains injection mouling tolerances. Look for SPI Standards & Practices of PlasticsMolders. -- JHG
