Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Good afternoon. We have a lot of

Status
Not open for further replies.
Violka

Violka

Chemical
Nov 21, 2011
4
Good afternoon.

We have a lot of problems with EPDM acceleration on roll mills, especially compounds with high CB loading. The accelerated batch is rise up and go over to fast roll. Tackifiers addition does not help. Could you please advise?

Thnak you in advance.
 
Status
Not open for further replies.

Similar threads

N
  • Locked
  • Question
How to bond or increase adhesion of a extruded silicone hose(braided hose, heater hose etc)?
Replies
0
Views
606
nikhilmathew
N
R
  • Question
Reduce compression set of chloroprene/neoprene
Replies
4
Views
5K
gogreen2013
gogreen2013
A
  • Locked
  • Question
Degradation of white nitrile butadiene rubber hose
Replies
2
Views
1K
TugboatEng
TugboatEng
edison vontex
  • Locked
  • Question
Is there currently a method to completely solve the blooming problem in rubber products or at least
Replies
0
Views
569
edison vontex
edison vontex
scott1971
  • Locked
  • Question
Origins of "FPM" and "FFPM" for fluoroelastomer and perfluoroelastomer?
Replies
0
Views
486
scott1971
scott1971

Part and Inventory Search

Sponsor

Back
Top Bottom