Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Good at reactions...please help!!

Status
Not open for further replies.

MariaAndreaGM

Chemical
Joined
Aug 24, 2008
Messages
3
Location
MX
Hi, in my job there is a glass finish reactor and I would like to know what reactions could take place in there. The characteristics of the reactor are the folowwings:
- temperautre: -15 to 175 degrees celsius
- pressure: -1 to 4 bars
- pH from 0 to 12.5
- there is pH control and solvents are accepted
The reactions that we know are:
.saponification
.organic colorants reactions
.oxidations
.esterifications
Some others?????????
 
Sorry but this question makes absolutely no sense.
Are you asking if your reactor could be used for some other purpose? If so yes if properly equipped for it. Such as acidification, neutralizations, extractions, on and on.
Or are you asking about some possible side reaction that you may or may have in this vessel? If so you have provided nowhere near enough information. Start with reactants added.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top