Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
Graphite coating of finely woven stainless steel mesh
- Thread starter JcMcF
- Start date
Haven't heard of a fluidized bed process for Graphite Coatings.
Depending on your end use requirements one approach would be to use a solid film Graphite lubricant. In our process we use the Henkel Aquadag to coat all fasteners on our polymer lines. No fastener is made up without the Aquadag coating. The coating is quite tenacious. To remove it we cycle the fasteners through a Pyrolysis Furnace, then re coat. I would contact Henkel with the particulars of you problem.
Depending on your end use requirements one approach would be to use a solid film Graphite lubricant. In our process we use the Henkel Aquadag to coat all fasteners on our polymer lines. No fastener is made up without the Aquadag coating. The coating is quite tenacious. To remove it we cycle the fasteners through a Pyrolysis Furnace, then re coat. I would contact Henkel with the particulars of you problem.
- Status
Similar threads
- Locked
- Question