Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Greylock 14 (Graylock 14)
- Thread starter blckwtr
- Start date
- Thread starter
- #3
moltenmetal
Chemical
Google doesn't work unless you try variants of spelling!
blckwtr,
I used to type in to go to their website, but now it redirects the link to that oceaneering website. If you need the catalog, you can find one in the link below. We used them as clamp connectors for the removable tube bundle in a Syngas Effluent Cooler.
I used to type in to go to their website, but now it redirects the link to that oceaneering website. If you need the catalog, you can find one in the link below. We used them as clamp connectors for the removable tube bundle in a Syngas Effluent Cooler.
blckwtr,
In my opinion, Grayloc fittings are a well known, well engineered product, but come at a premium price.
One of the primary advantages over flanged pipe design seems to be the ability to route pipes closer together. Additionally, teardown of the connection can be done in a tight space. Both of these features are of great importance in applications such as offshore oil platforms...
_MJC
In my opinion, Grayloc fittings are a well known, well engineered product, but come at a premium price.
One of the primary advantages over flanged pipe design seems to be the ability to route pipes closer together. Additionally, teardown of the connection can be done in a tight space. Both of these features are of great importance in applications such as offshore oil platforms...
_MJC
Hi.
I am interested in anyones experience in using 'Loload' spiral wound gaskets.
In particular in the situation with bolting together ANSI.B.16.5 Slip On Flange to Weld neck flange.
It has been suggested that using a traditional 'spiral wound' gasket is not recommended due to potential difficulties in torquing up, sufficient to give metal to metal contact.
I am interested in anyones experience in using 'Loload' spiral wound gaskets.
In particular in the situation with bolting together ANSI.B.16.5 Slip On Flange to Weld neck flange.
It has been suggested that using a traditional 'spiral wound' gasket is not recommended due to potential difficulties in torquing up, sufficient to give metal to metal contact.
- Status
Similar threads
- Locked
- Question