Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Gurley method
- Thread starter yem
- Start date
Don't know if this helps...
Gurley numbers are used to indicate the relative permeability of membranes or materials...The number (in sec) is obtained by measuring how long a known volume of air at constant pressure takes to pass through a material.
Your constants would be air Pressure, Area of membrane...
Here is a website you might find interesting...
In the past, I've run across some good literature on this from WL Gore...the manufacturer of GoreTex!!
Gurley numbers are used to indicate the relative permeability of membranes or materials...The number (in sec) is obtained by measuring how long a known volume of air at constant pressure takes to pass through a material.
Your constants would be air Pressure, Area of membrane...
Here is a website you might find interesting...
In the past, I've run across some good literature on this from WL Gore...the manufacturer of GoreTex!!
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question