Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Gx8CrMoAlSi18.3 heat treatment problem

Thread starter berkrefik
Start date Jul 19, 2012

Status: Not open for further replies.

Jul 19, 2012

berkrefik

Materials

I am having a problem with mechanical properties of GX8CrMoAlSi18.3 alloy which contains 0.09% C, 1.00% Si, 0.80% Mn, 18% Cr, 3% Mo, 1% Al. I need to get tensile strength Values above 500 N/mm2, but i only got 320 max. Any comments about the heat treatment will be pleased. Thank you...