Handrail Extension Clear Idea

[Rajesh V]

Have any one clear idea about the handrail extension from the center of post. some structural they shown 1'-0" extension from center of post to outer edge of P-shape, another one design refers center of post to center of end P-shape pipe.and some design the 1'-0" extension from the center of post to start of bent location(corner radius bent).

 

[IFRs]

I think the handrail is supposed to extend 12" past the nose of the bottom tread. Check OSHA to be sure.

 

[dik]

We use past the nosing to outside of rail tube.

Dik

 

[Ron]

Agree...nosing to outside of rail loop. In US that's an ADA requirement

 

[Rajesh V]

thanks who are discussed my questions

 

[wannabeSE]

For handrail extension requirement in the IBC, see the §1014.6 in the 2015 edition, and §1012.6 in the 2012 and 2009.

 

[BUGGAR]

I've seen them delivered to the site with sleeves like a slide trombone. They get welded after ADA approval. (ADA lawsuits are big here).