Having trouble with Multi-Section Solid

[Jashe]

I've been working with the Multi-Section tool and as I'm selecting the sketches I want to use to create it, I've been getting an error. I've attached a screenshot. Does anybody have any ideas on a)What the error message is saying and b)How to over come this issue?

 

[jackk]

Something in Sketch.32 is not connected (there is a gap)

 

[Jashe]

I was able to fix that sketch as well as the others that had the same problem. First, there was an Intersection line that I found using Sketch Analysis that needed to be erased. Then there was a sharp corner that I was able to fix so that it wasn't as sharp and it worked instantly.