Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Headlight bulbs 1

Status
Not open for further replies.

miningman

Mining
Feb 26, 2003
957
I dont want to go to HIDs or LEDs. Most knowledgeable people accept that the H7 uprades come at the expense of shortened life span. Has anyone identified the sweet spot where one is not changing bulbs every 4-6 months???
 
Replies continue below

Recommended for you

Depends on your electrical system, I find. Good earths and clean supply through a quality relay seems to help a lot. The sparkies reckoned inrush currents were killing them when too high.
If it's on trucks or other mobile equipment, vibrations don't help much either. We had a fleet of Volvos that ate lights every month or so (rubbish trucks, plenty of dust and rough roads). A heat-resistant foam rubber pad between the bulb and the reflector socket got us up to about 3-4 months, at least on the headlights. Similar vibration absorbers on the taillights helped with those globes too.
Obviously you want to be very careful about the heat resistance with headlight globes!
 
Mongrel said:
rubbish trucks
The trucks were rubbish, or they hauled rubbish? [wink]

"Schiefgehen wird, was schiefgehen kann" - das Murphygesetz
 
Hah, well, between the frequent electronics failures (due to vibrations, according to Volvo), the turbo failures, and those awful synchro 9-speed boxes...
Either would be appropriate! 😂
In any case, we were glad to see the back of the fleet after the 5-year lease plan, and move back to International. At least their gear was reliable, if a bit agricultural...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor