Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Heater Bands

Status
Not open for further replies.

batthina

Materials
Apr 11, 2006
9
I am trying to find a Heater Band for a pressure vessel that can go up to >700F. I wanted to know if there is any kind of a band that is temperature controllable. Can I maintain 700F for a few hrs?

Thanks!
 
Replies continue below

Recommended for you

pennpoint (Mechanical) Apr 17, 2006
batthina
You do not address what it is you trying to achieve. Be very careful heating a vessel shell as it will affect (reduce) the vessels ultimate pressure limit. If you exceed the design criteria you can have a catistrofic failure of the shell and injuries can be sigificant.
Good Luck

Best regards
pennpoint
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor