Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Heavy Aromatics C10+ 1

Status
Not open for further replies.

2334

Chemical
Aug 1, 2001
2
0
0
IR
We are executing Third Aromatics project and we have 40,000 t/y heavy aromatics.We are interested to convert our heavy aromatics to xylenes,solvents or .....
I'm searching about possibilities of providing such technology .I would be grateful to recieve any information you can submit in this regard .
thank you
 
Replies continue below

Recommended for you

I' have a good experience in this field, because I've done a similar feasibility evaluation for a refining company, so I'can help you if you give some details about you feedstocks. Let me know.
 
UOP has a process called THDA. In this A10+ are mixed with lighter aromatics (toluene)in the presence of H2 to produce bencene and toluene.

The process temperature is above 900 ºF depending the conversion required.
 
Status
Not open for further replies.
Back
Top