heenan drives

[mec1]

i have a heenan drive 9001 mark 2. supplying a 3 phase pump.the drive has a 3 phase supply to it but there is no voltage on the control cards and the remote keypad on the front of the panel is blank all drive internal fuses have been checked.the fault light is constantly on and wont reset

 

[ScottyUK]

Heenan were absorbed into the FKI empire a while ago. Try this link for their current details in the UK.

http://www.fki.co.uk/subsidary_results_detail.cfm?subsidID=141

regards,


Scotty.