Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
helix along a path?
- Thread starter SUNDEMON
- Start date
hyposmurf
Electrical
- Mar 25, 2004
- 80
- 0
- 0
Hi Sundemon, what do you want to do?
It is easy to extrude any profile on a 2d path , but only a circle on a 3d path.
It is easy to extrude any profile on a 2d path , but only a circle on a 3d path.
- Thread starter
- #3
hi hyposmurf;
sorry for the delay in getting back to you, I had a day off!
I was trying to draw a 3D flexible accordian-type hose running along a curved path. I thought that if I could run a helix along the path, that would be a useful visual element in the drawing. I have a few helix lisps, but the only can be created in a straight line. I searched around various lisp libraries, but I didn't see anything that would follow a path.
As a workaround, I ended up creating a helix with a single revoltion, making that a block, and placing an aligned arrangement along the curved path through the "measure" command.
Still, I would be interested to know a good method to represent a bending flexible hose.
BTW, I have extruded shapes other than a circle along the helix, but the alignment of the extruded shape can be unpredicatble. Also, you end up with a very heavy drawing in terms of file size.
Thanks for answering,
sundemon
sorry for the delay in getting back to you, I had a day off!
I was trying to draw a 3D flexible accordian-type hose running along a curved path. I thought that if I could run a helix along the path, that would be a useful visual element in the drawing. I have a few helix lisps, but the only can be created in a straight line. I searched around various lisp libraries, but I didn't see anything that would follow a path.
As a workaround, I ended up creating a helix with a single revoltion, making that a block, and placing an aligned arrangement along the curved path through the "measure" command.
Still, I would be interested to know a good method to represent a bending flexible hose.
BTW, I have extruded shapes other than a circle along the helix, but the alignment of the extruded shape can be unpredicatble. Also, you end up with a very heavy drawing in terms of file size.
Thanks for answering,
sundemon
anotherpipeguy
Mechanical
A helix for every occasion.
and...
"we should only try to get even with those that are helping us."
and...
"we should only try to get even with those that are helping us."
- Status
Similar threads
- Locked
- Question