Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help. Need help interpeting FAA-STD-019e for a I/O panel grounding application

Thread starter Mwoozley
Start date Oct 14, 2013

Status: Not open for further replies.

Oct 14, 2013

Mwoozley

Mechanical

We need help interpreting FAA-STD-019e sections 4.1.1.2.4.2 and 4.2.1.6 for a I/O panel grounding application entering a facility from a tower. We are familiar with the Motorola R56 requirements where the ground bus bar is separate from the metal bulkhead connector panel (i/o panel) , but are unclear how FAA-STD-019e requirements can be sealed.