Dec 21, 2007 #1 madinenisunilkumar Mechanical Dec 20, 2007 1 i want help on scenario of unigraphics (nx3.0) motion
Dec 21, 2007 #2 hudson888 Mechanical Jun 19, 2007 2,275 Well since your question is too general to possibly answer in anything but the broadest of terms, you could try Application>Motion then hit F1 for help on context. You could also try CAST if you have it. Failing all that try http://www.igetit.com where you can sign up for an online course, or speak to your local Siemens PLM support team about doing one of their training courses. Best Regards Hudson Upvote 0 Downvote
Well since your question is too general to possibly answer in anything but the broadest of terms, you could try Application>Motion then hit F1 for help on context. You could also try CAST if you have it. Failing all that try http://www.igetit.com where you can sign up for an online course, or speak to your local Siemens PLM support team about doing one of their training courses. Best Regards Hudson
Dec 21, 2007 #3 joycejo Aerospace Sep 22, 2006 627 Hudson, Thats http://www.myigetit.com Thanks John Joyce Tata Technologies iKS 1675 Larimer St. Denver, CO http://www.myigetit.com Upvote 0 Downvote
Hudson, Thats http://www.myigetit.com Thanks John Joyce Tata Technologies iKS 1675 Larimer St. Denver, CO http://www.myigetit.com
Dec 26, 2007 #4 DavidTolsma Mechanical Oct 19, 2006 247 Try CAST or start hitting buttons -Dave http://plmwiki.comhttp://groups.google.com/group/NX_CAX/ Upvote 0 Downvote
