HELP!! - Pro/E 2001 (UNIX) Core Dump

[ella0509]

Hello everyone.

I am doing some renderings for our R&D dept. and have come across a problem I thought you might be of some help with.

I have imported a .jpg image into my workspace. This image is then attached to the top of a disc. Worked fine all day on Friday, managed some nice renderings etc. Closed down, opened up today, everytime I try to open that part (in shaded mode) or any assembly using that part, Pro/E shuts down and creates a dump file. If I switch-off "enable textures" in the model display settings I can open it and work with it with no problems. Is this a known bug, is there a workaround??

Thanks for your help,
Lee

 

[Heckler]

Lee,

What build/date code are you using? I would also check PTC's website for any reported bugs.

Best Regards,

Heckler
Sr. Mechanical Engineer
SW2005 SP 4.0 & Pro/E 2001
Dell Precision 370
P4 3.6 GHz, 1GB RAM
XP Pro SP2.0
NIVIDA Quadro FX 1400
o
_`\(,_
(_)/ (_)

"There is no trouble so great or grave that cannot be much diminished by a nice cup of tea" Bernard-Paul Heroux

 

[mjcole]

You can try the config option

display wireframe

in config.pro

see if that helps. otherwise try to find an older prt.? version before the .jpg was added.

Michael

 

[ella0509]

Hi all, thanks for your response.

I seem to have fixed the problem, but I'm not sure which change I made sorted it out.

1. Changed the .jpg extension to .tx3.
2. Created unique folder for this and other images in my UNIX home directory.
3. Put unique texture_search_path into my config.pro that points to the folder in 2 above.

Now opens, revolves etc without problem.

Lee