Apr 19, 2010 #1 uwam2ie Automotive Jul 11, 2005 1,008 how can I do a paramtric silhouette outline in nx6? thx in ad
Apr 19, 2010 #2 JohnRBaker Mechanical Jun 1, 2006 36,293 By 'parametric' I assume that you mean Associative, correct? If so, have you looked at... Insert -> Curves from Bodies -> Extract -> Isocline Curves ...setting the 'Vector' to 'View Direction' and the 'Angle' to ZERO degrees (be sure that you are not in a Perspective View)? John R. Baker, P.E. Product 'Evangelist' Product Design Solutions Siemens PLM Software Inc. Industry Sector Cypress, CA http://www.siemens.com/plmhttp://www.plmworld.org/museum/ To an Engineer, the glass is twice as big as it needs to be. Upvote 0 Downvote
By 'parametric' I assume that you mean Associative, correct? If so, have you looked at... Insert -> Curves from Bodies -> Extract -> Isocline Curves ...setting the 'Vector' to 'View Direction' and the 'Angle' to ZERO degrees (be sure that you are not in a Perspective View)? John R. Baker, P.E. Product 'Evangelist' Product Design Solutions Siemens PLM Software Inc. Industry Sector Cypress, CA http://www.siemens.com/plmhttp://www.plmworld.org/museum/ To an Engineer, the glass is twice as big as it needs to be.
Apr 19, 2010 #3 hudson888 Mechanical Jun 19, 2007 2,275 In drafting expand the view first. Best Regards Hudson www.jamb.com.au Nil Desperandum illegitimi non carborundum Upvote 0 Downvote
In drafting expand the view first. Best Regards Hudson www.jamb.com.au Nil Desperandum illegitimi non carborundum
Apr 19, 2010 Thread starter #4 uwam2ie Automotive Jul 11, 2005 1,008 ok I thought of parametric, Insert -> Curves from Bodies -> Extract -> .... those curves are still without any associativity. I thought there is something like plane from view, or a workaround to get an associative result. thx in ad Upvote 0 Downvote
ok I thought of parametric, Insert -> Curves from Bodies -> Extract -> .... those curves are still without any associativity. I thought there is something like plane from view, or a workaround to get an associative result. thx in ad
Apr 19, 2010 Thread starter #5 uwam2ie Automotive Jul 11, 2005 1,008 thx JOHN I found it... Upvote 0 Downvote
