Hi Everyone

[SaiedM]

Hi Every one,
I'm not so expert in Abaqus, I built a model and meshed it and defined everything. Here I used cohesive elements. But when I run it, I get missing a property definition error.
Could you please help me solve it.
I have also attached my file.
Thanks...

 

[themaninblue]

It looks from the input file like you've applied property definitions to the various part components. Our CAE license is busy, or would check what it all looks like, but judging by the error in the data file, looks like an element or group of elements doesnt have a property definition. Are there any elements that don't fall into the elsets defined below?

***ERROR: ELEMENT 12801 IS MISSING A PROPERTY DEFINITION; CHECK ELEMENT SET
AND ELEMENT DEFINITIONS


** Section: Layers
*Solid Section, elset=H_H_LAYER1, orientation=H-Ori-1, material=Iso
,
** Section: Layers
*Solid Section, elset=H_H_LAYER2, orientation=H-Ori-1, material=Iso
,
** Section: Layers
*Solid Section, elset=H_H_LAYER3M, orientation=H-Ori-1, material=Iso
,
*Solid Section, elset=H__I4, orientation=H-Ori-1, material=Iso
,
** Section: Layers
*Solid Section, elset=H_H_LAYER5, orientation=H-Ori-1, material=Iso
,
** Section: Interzone
*Solid Section, elset=H_H_INTER1, orientation=H-Ori-1, material=I-1
,
** Section: Interzone
*Solid Section, elset=H_H_INTER3M, orientation=H-Ori-1, material=I-1
,
** Section: Interzone
*Solid Section, elset=H_H_INTER4, orientation=H-Ori-1, material=I-1
,
** Section: Interzone
*Solid Section, elset=H_H_INTER2, orientation=H-Ori-1, material=I-1
,
** Section: Interzone
*Solid Section, elset=H_H_INTER5, orientation=H-Ori-1, material=I-1
,