Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hi Temp cables 2

Status
Not open for further replies.

sparky001

Electrical
Dec 10, 2002
5
Hi,
Do any members know of a cable manufacturer that produces cables, flexible tinned copper,1mm2,4 cores plus earth,rated at temp exceeding 155 degrees cel apart from copper clad MIMS type ??.
 
Replies continue below

Recommended for you

Hi,

You could check out Hubner & Suhner (They have a cable called Radox 155 (See below)

RADOX® 125 or 155 multicore cable (screened or unscreened)

RADOX multicore cables are designed for various applications where high and very low operation temperatures and high resistance to ozone, weathering, oils and chemicals are needed. RADOX cables are highly flame retardant.


Characteristics

halogen free for RADOX 125
electron beam crosslinked
operation temperature -40 to +125°C for RADOX 125
operation temperature -55 to +155°C for RADOX 155
short circuit overload up to 280°C
high current carrying capacity
highly resistant to ozone, weathering, heat pressure, hydrolysis, oils and abrasion
flame retardant
soldering resistant
easy to strip and process
flexible


Regards,

Tom
 
Radix.
If you want high temp, high ampacity, and flex try them
 
Thanks All,
Have located some Radox 125.C on east coast that will do for now and have ordered some Radox 155.C from Switzerland for next time.

regards Mark
 
THANX jbartos,
Cheaper,I can call conductor colours, and go hotter ie 180.C

Sparky001
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor