hidden line hatching / hatch style

[uwam2ie]

Why ????
I have section view in NX5 or Nx7.5.1 edited the hatch style, type lead distance 3mm angle 45 everything looks fine - crosshatched. Editing the style activate the hidden line hatching(cleaner hatching display) the hatch style lead is not displayed anymore switched to standard hatching - ... try it is easy to dublicate

 

[jerry1423]

try going into the view:
style > section > toggle "assembly crosshatching"

Then do what you want to do

 

[uwam2ie]

can you explain why ? has nothing to do with assembly crosshatching, btw doesn't work either, hidden line hatching is controlling the hatch style

 

[JohnRBaker]

Any section view created on a Drawing will utilize the so-called 'Assembly Hatching' if that option is toggled ON (when making a Drawing, the system does not care or even KNOW whether the model being drafted is an Assembly or a Piece part).

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.