Hidden sketch entities 1

[cubalibre000]

Hi,
when I'm in sketch editing part inside the assembly, all sketch entities are hidden.
In NX3 no.
There are setting to avoid this disappearance.

Thank you...

 

[phillpd]

If you're using Master Model, then change the Reference Set to be 'Enter Part'.

 

[cowski]

In addition to phillpd's answer, you will also need to be aware of the component's layer option (original, as specified, etc) and what layers are visible in the assembly. There is also layer visible in view, but that should never be used to mask layers in the modeling application.

 

[cubalibre000]

Hi phillpd,
yes....you have right.
Thank you...