Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

High -Brightness LEDS

Status
Not open for further replies.

opticsman

Industrial
Jun 4, 2002
58
Can any one advise me on where to obtain of high-brightness LEDS, as individual components and also a small arrays (eg 2 X 2 red & green). Thanks.

 
Replies continue below

Recommended for you


Try: ledmuseum.org and misty.com/~don/index.html
 
Take a look at Kingbright and Stanley. They are the 2 brightess that I am aware of. I use both regularly. Some are so bright they will hurt your eyes to look directly into them.
 

Lewis — Good point. Some of the traffic-signal types will almost burn holes in retinas. Agilent is one maker of such. agilent.com/Feature/English/archive/E017.html They have had decent prototype-quantity purchases set up through an online vendor.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor