Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

High Level Switch for Floating Roof Tank

Status
Not open for further replies.

controlnovice

Electrical
Jul 28, 2004
975
0
0
US
Any good experiences with high level switches for floating roof tanks?

Found OMNTEC VersaLevel, Mobrey, Magnetrol, and a few others, but have no experience with them.

Any recommendations?

______________________________________________________________________________
This is normally the space where people post something insightful.
 
Replies continue below

Recommended for you

Consider avoiding discrete signals for the device. Instead consider the analog level signals then digest the signals for alarms within the control and perhaps shutdown systems. Consider dual signals - often with different technologies. Such plans could separate operation modes from trip modes and apply different errors due to density, temperature, fouling errors etc.
 
Have analog already. Looking for that secondary/last ditch signal.

______________________________________________________________________________
This is normally the space where people post something insightful.
 
Status
Not open for further replies.
Back
Top