High Pressure vessel design using DIV 3 2

[Ronak_Patel]

Hello All,

We are trying to prepare Design philosophy of High-pressure vessels ( > 700 bar) using ASME sec8 div 3 in my organization.

Please share any book, existing licensor or PMC specification for High pressure vessels Design for reference and guidance.

 

[IdanPV]

Hi,

There are currently only 49 pressure vessel manufacturers with a U3 Certificate of Authorization, according to the ASME database.
I recommend reaching out to one of them for formal consultation.
Given the significance of your project, relying on recommendations from the Internet may not be the most prudent approach.

 

[DriveMeNuts]

He is asking for references to literature. not advice.

 

[IdanPV]

The literature he is asking for may be found within a manufacturers with a U3 Certificate of Authorization.
He better reaching out to one of them for help.

 

[r6155]

Why not read scope and jurisdiction in Div.3?
This is enough.

Regards

 

[EngineerEPC]

Hi Ronak,
out of curiosity, which industry are you catering for such a high-pressure value? Nuclear?

Regards

 

[Ronak_Patel]

Hello @Ariba01123

We cater to Oil & Gas, pet-chem and fertilizer industry. As of Now, we do not have any specific Vessel to design but my organization is preparing for any upcoming equipment specifically in hydrogen service.

Hello @r6155, we are reading div3, but we wanted to understand more theoretical background in non-linear analysis of pressure vessels and fracture mechanics, so that we can apply div3 sensibly.

 

[IdanPV]

Take a look at PTB-5.

 

[Ronak_Patel]

@IdanPV
Thank you for your guidance!!

 

[EngineerEPC]

Hello Ronak,

Best wishes to you and firm.

Hello IdanPV

Thanks for the guidance.