Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

High speed relay 1

Status
Not open for further replies.

workexperiencekid

Electrical
Jan 10, 2012
1
G'day!

I'm needing a relay with a very fast switching speed to control a circuit. Do you know what are the fastest relays that are available in the market?

Cheers,
Work Experience Kid
 
Replies continue below

Recommended for you

Time is money. How fast can you afford to go??

Bill
--------------------
"Why not the best?"
Jimmy Carter
 
Do you need solid state or mechanical? Current and voltage? DC or AC? If AC, HF? Maximum frequency?

An ordinary little reed relay switches in 50 - 100 microseconds. That is fast. But contacts cannot take much load. Solid state switches (IGBTs, MOSFETs) switch in a few hundred nanoseconds and can carry hundreds of amps and thousands of volts. But have some zero crossing distortion. Good for DC, though.

A standard relay switches in milliseconds and a contactor needs ten or twenty ms.

You need to specify your needs better if you want a specific answer.


Gunnar Englund
--------------------------------------
Half full - Half empty? I don't mind. It's what in it that counts.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor