Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hinges in shell element

Status
Not open for further replies.
s_saranya

s_saranya

Civil/Environmental
Oct 23, 2020
59
Is it possible to assign hinges in shell elements in sap2000?
Eg. Shear walls modelled using shell elements
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Unfortunately not, but you can assign a small shell modifier to some elements in order to indirectly form a hinge.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

L
  • Question
Seismic Design + Wall-Beam Connections in Dual Systems
Replies
1
Views
2K
Agent Coconut
A
dengebre
  • Locked
  • Question
Continuity of Wall Segments in Wood Shear Walls
Replies
3
Views
2K
JAE
JAE
Erik_Struct
  • Locked
  • Question
Estimate Drift in Steel moment Frame
Replies
2
Views
545
Erik_Struct
Erik_Struct
masterdesign
  • Locked
  • Question
[WOOD] In plane force distribution based on 4.3.5.5.1 exception
Replies
5
Views
549
masterdesign
masterdesign
chandra sekar
  • Locked
  • Question
In endplate shear connection of a p
Replies
1
Views
284
driftLimiter
driftLimiter

Part and Inventory Search

Sponsor

Back
Top Bottom