Hole wizard special holes

[LOKi42]

Is there a way to add custom holes to hole wizard. Like slotted holes?

 

[ctopher]

Did you do a search here? It has been discussed before.

Chris
Sr. Mechanical Designer, CAD
SolidWorks 05 SP3.1 / PDMWorks 05
ctopher's home site (updated 06-21-05)
FAQ559-1100
FAQ559-716

 

[Heckler]

Why don't you just make those slotted holes into a library part and add them to your design library?

Best Regards,

Heckler
Sr. Mechanical Engineer
SW2005 SP 4.0 & Pro/E 2001
Dell Precision 370
P4 3.6 GHz, 1GB RAM
XP Pro SP2.0
NIVIDA Quadro FX 1400
o
_`\(,_
(_)/ (_)

"There is no trouble so great or grave that cannot be much diminished by a nice cup of tea" Bernard-Paul Heroux

 

[LOKi42]

I took a quick look but didn't see anything. Ill check again

 

[LOKi42]

nothing comes up for hole wizard at all

 

[ctopher]

That was a fast check.
Try "wizard". There are several.
There is not a slot option in HW.

Chris
Sr. Mechanical Designer, CAD
SolidWorks 05 SP3.1 / PDMWorks 05
ctopher's home site (updated 06-21-05)
FAQ559-1100
FAQ559-716

 

[CorBlimeyLimey]

Use the search button below the thread title (between Forum & FAQs). It preselects the forum you are in for the search & I just got 20 hits.

If you use the main

button, you have to set the search parameters.

The best way is as Heckler suggested.


Making the best use of this Forum. faq559-716
How to get answers to your SW questions. faq559-1091
Helpful SW websites every user should be aware of faq559-520