Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Honeycomb
- Thread starter atn57
- Start date
- Thread starter
- #3
Create a part model based one the honecomb structural shape.
Have this model parameterized to control the basic size.
i.e. Thickness, width and length.
You would need to setup a rectangular pattern with it's instance's tied to the above parameters.
HTH,
puck
Have this model parameterized to control the basic size.
i.e. Thickness, width and length.
You would need to setup a rectangular pattern with it's instance's tied to the above parameters.
HTH,
puck
- Status
Similar threads
