Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Hot alignment & Motor run test

Status
Not open for further replies.

Ebyate

Mechanical
Jul 27, 2016
20
0
0
KW
Hi,

Would like to know if Hot alignment is done first before MRT or done after

thanks
 
Replies continue below

Recommended for you

What is MRT?

It is a capital mistake to theorise before one has data. Insensibly one begins to twist facts to suit theories, instead of theories to suit facts. (Sherlock Holmes - A Scandal in Bohemia.)
 
After..

I would recommend some sort of alignment monitoring.

Example: RotAlign live trend.

The computer knows where you left the alignment, after running you will have an idea of how each machine grows thermally.

There is of course the old stand by..... dial indicators and graph paper.....
 
Depends on whether the pump /motor are already connected.
If not connected align after MRT.
If connected pump / motor should be aligned prior to test after pump has been brought up to operating temp.


It is a capital mistake to theorise before one has data. Insensibly one begins to twist facts to suit theories, instead of theories to suit facts. (Sherlock Holmes - A Scandal in Bohemia.)
 
Status
Not open for further replies.
Back
Top