Hot Melt Adhesives for Fabric

[kaleem546]

We want to switch to the Hot Melt Adhesive Application from Conventional Electrostatic Adhesive Application on over Fabric to Metal Surface.
Can anyone advise me a good vendor, his own experience, advantages, disadvantages,...etc.

A detailed reply with personal contact for discussions is highly appreciated.

Thanks,

Kaleem

 

[Glueguy]

Kaleem,

Without knowing your location, it is hard to refer a vendor. I would recommend a hot melt called HL-0747HS for this application. It provides a structural bond approved by auto manufacturers. Depending on the application, I would either suggest a roll coater or spray head to apply.

John Schrock

http://www.glubie.com