Sep 25, 2006 #1 fokinniga Specifier/Regulator Sep 25, 2006 2 Is there some way to extract to file, the a layer lines lenght?
Sep 25, 2006 #2 chicopee Mechanical Feb 15, 2003 6,199 I dont know if this is what you are looking- type LI (listing) on command line; then press F2 for a history of the line; highligth the pertinent info; do a copy to clip board; do a paste on the file which you want the line length. Upvote 0 Downvote
I dont know if this is what you are looking- type LI (listing) on command line; then press F2 for a history of the line; highligth the pertinent info; do a copy to clip board; do a paste on the file which you want the line length.
Sep 26, 2006 #3 borgunit Mechanical Jul 26, 2002 1,153 You can drag them in from design center or copy your *.lin file to wherever. "Everybody is ignorant, only on different subjects." — Will Rogers Upvote 0 Downvote
You can drag them in from design center or copy your *.lin file to wherever. "Everybody is ignorant, only on different subjects." — Will Rogers
Sep 26, 2006 #4 Exxit Computer Aug 18, 2003 804 fokinniga, I think you want to have the length inside an excel.xls. http://www.jtbworld.com/lisp/bomlenghts.htmThen copy it into the *.xls. That's more comfortable like "_list" I don't know an automatically way. Search in the http://www and reply. Lothar ADT 2004 ACAD 2002 Upvote 0 Downvote
fokinniga, I think you want to have the length inside an excel.xls. http://www.jtbworld.com/lisp/bomlenghts.htmThen copy it into the *.xls. That's more comfortable like "_list" I don't know an automatically way. Search in the http://www and reply. Lothar ADT 2004 ACAD 2002
Sep 26, 2006 Thread starter #5 fokinniga Specifier/Regulator Sep 25, 2006 2 Thanks.. for your help... Upvote 0 Downvote
