Oakjelly21
Automotive
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
How do I make imported sketches into 2D planar geometry 1
- Thread starter Oakjelly21
- Start date
- Status
-
1
- #2
What do you mean by "directly from Catia" ? Which file format or are you using the associative interface ?
Is that part supposed to be a wire or a 2D shell (faces) ? You should select the proper Base Feature depending on that and click Continue. This will start the sketcher where you can open the saved sketches ("Add Sketch").
Is that part supposed to be a wire or a 2D shell (faces) ? You should select the proper Base Feature depending on that and click Continue. This will start the sketcher where you can open the saved sketches ("Add Sketch").
- Thread starter
- #3
Oakjelly21
Automotive
Thank you! The add sketch function worked.
- Status
Similar threads
- Question
- Locked