How I display the reaction per floor in ETABS

[swelm]

Hello

i do my best to display the reaction per floor in etabs programm put i can not

only reaction i can display at base level only

anyone have idea about that question

best regards

 

[slickdeals]

By reaction, I am assuming you mean story shear. The way to display it is to go to display --> show tables --> building output --> story shears. HTH

 

[swelm]

thanks slickdeals for your answer but you did not get my point

i need to check the column load per floor because i have building 35 story and the size of columns should be decrease from floor to floor.
for example
the columns at the basementis 1500mmx500mm,
at the second floor it should be less than that
but how i display the column load per floor in etabs i do not know

thanks

 

[swelm]

i got it after many trail

thanks

 

[slickdeals]

Oh ok, but you can always display the axial load in the column and take a difference between the levels to find the axial load. How did you find it otherwise?

 

[swelm]

you can make it form display then show tables then frame foce

you will see the table show you column foce per floor with all case of loading

best regards