how to add constrains between geometry(line or circle) and drafting views

[NIMANIMAX72]

hi there
is there a way to add a line-circle-point to drafting views that has constrains with drafted lines?
for example i have a part like this

https://files.engineering.com/getfi...-7ffc-4a9e-abff-287dd5a9b7ac&file=Capture.JPG

now i want to have a circle inside.like this

https://files.engineering.com/getfile.aspx?folder=fc31708d-113e-4358-99d8-aeeddbd94568&file=56.JPG

this circle should be tangent to inner walls but there is no way to add permanent constrains between this circle and inner walls.when i use this box

https://files.engineering.com/getfile.aspx?folder=0e0ed9fd-3dd9-4475-86f5-d32af80acff6&file=562.JPG

circle dose not fixed and moves around freely

 

[itsmyjob]

why not using this function to show your picture in your post?

Eric N.
indocti discant et ament meminisse periti ​

 

[Stick.]

Honestly, I've never had great luck with adding 2D geometry to the drawing and trying to constrain it to much of anything. Maybe there's a good way to do it, but I haven't found it yet. Would it make sense for you to model something on the 3D side (is the circle representing a sphere in the bolt/fitting you've modeled?) and use that to generate the drawing view you want? You can always hide the 3D object in other views and/or use overload properties to modify how it is shown in each view.

 

[rickyt]

Have show "constraints option" and "create detected constraints" toggled on.
create circle
choose create "geometrical constraint"

Ignore the vertical fixed line, I didn't use it for anything.

If 3d model updates the circle updates to maintain constraints.

If a dimension is applied, you can choose it as a driving dimension

 

[NIMANIMAX72]

Stick. tnx but it seems overload properties only works for assembly and not for parts.(it was useful anyway)
rickyt this is exacly what i want to do can you tell me how you add constrains between 2D geometry and drawing because when i try i only get fix option(tangency cant be applied)

 

[rickyt]

use the create geometrical constraints within the Geometry Modification toolbar.