How to change font in Part list table??

[tinhman]

Could somebody please show me how to change font in part list table ( draft mode)?
Thanks in advance

 

[KENAT]

Right click on parts list, properties, general tab.

Unless things have changed.

Posting guidelines faq731-376

http://eng-tips.com/market.cfm?

(probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484​

 

[tinhman]

Thanks for the reply.
But it changed in the pop up window only not in my drawing.

 

[beachcomber]

It's in the Table Style settings, but you will need to have a Text Style created for whatever settings you want.

bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.

Where would we be without sat-nav?

 

[tinhman]

"Table Style setting" where can i find it??
I am using ST3. I ran into this before but now i can not find it any more.

 

[beachcomber]

Click the View tab then Styles.
In there you will see a drop-down to select the type of style you want to modify (Dimension, Table, Text, Fill etc)
If you want to create a new text style for your table this is where you do it.
Then select Table style from the drop-down and you can create a new table style or modify an existing one. You can set different text and line styles etc.
Its a bit tedious doing it this way, but in ST4 I think its all configurable in the table properties command.

bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.

Where would we be without sat-nav?

 

[tinhman]

Thanks