How to Check in &Check out NX part in Teamcenter

[vijay sawade]

I want check in NX part in Teamcenter .i have created part number in teamcenter

 

[NutAce]

You have two options.

In NX right click on the item in assembly navigator and select Check-out or check-in

In Teamcenter find your item, rightclick the NX Dataset (UGmaster or UGpart) and select Check-out/-in...

Couldn't be much simpeler...

Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX8.5.3 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5

HP Zbook15
Intel(R) Core(TM) i7-4800MQ
CPU @ 2.70 GHz Win7 64b
Nvidia K1100M 2048 MB DDR5

 

[NutAce]

There is actually a third option as well and that is to tell NX in the Customer Defaults to do the Check-out check-in procedure automatically...
This is however not (for concurrent engineering) the most prefered option.

Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX8.5.3 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5

HP Zbook15
Intel(R) Core(TM) i7-4800MQ
CPU @ 2.70 GHz Win7 64b
Nvidia K1100M 2048 MB DDR5

 

[vijay sawade]

Thank you, Sir
How to integrate (connect) NX part with Teamcenter,
By using nomenclature i have created a part number...

 

[NutAce]

If you have NX integrated (NXManager) with Teamcenter then there is no need to first create and item in Teamcenter...
You can just Start NX from Teamcenter and with file new (in Nx) create a new NXpart which will create an item in Teamcenter for you...

I suggest you get some books or documentation on how to work with NX and Teamcenter...would make it much easier for you

Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX8.5.3 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5

HP Zbook15
Intel(R) Core(TM) i7-4800MQ
CPU @ 2.70 GHz Win7 64b
Nvidia K1100M 2048 MB DDR5