PawelMaselko
Mechanical
- May 16, 2005
- 12
Hello everybody, Forum seems like nobody has problems with Marc 
,but i`ve got.
1.I want to cut a regular shape in planar plate. So i stretch this plate (using plane stress type of analysis) up to plastic strain (to get springback).
2.Then, i deactivate some elements (in another Loadcase) and i get springback.
3...but i want to cut a regulate shape (hole,rectangle), not deformed elements! So, here is the question:
=== How to rebuild this deformed elements (keeping strees distribution) to get some regular shape?
or maybe there is any possibility to create some mapped mesh around regular shap, durring the simulation?
I am waiitng to hear your any suggestions!!!
Thank you very much!
Pawel M
,but i`ve got.1.I want to cut a regular shape in planar plate. So i stretch this plate (using plane stress type of analysis) up to plastic strain (to get springback).
2.Then, i deactivate some elements (in another Loadcase) and i get springback.
3...but i want to cut a regulate shape (hole,rectangle), not deformed elements! So, here is the question:
=== How to rebuild this deformed elements (keeping strees distribution) to get some regular shape?
or maybe there is any possibility to create some mapped mesh around regular shap, durring the simulation?
I am waiitng to hear your any suggestions!!!
Thank you very much!
Pawel M