Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to Create Calming Perforated Baffle for Separator in PVELITE or AutoPipe Vessel?

Status
Not open for further replies.
SmallInfo

SmallInfo

Petroleum
Oct 30, 2017
104
Hi Experts,
I am creating a separator with a calming perforated baffle which I never put in vessel before, do you guys know how to put it in separator using preferable PVELITE but method using AutoPipe Vessel is fine as well.
Thanks in advance
Capture_vhwjxw.jpg
 
Status
Not open for further replies.

Similar threads

imransaeed1804
  • Locked
  • Question
Applying torsional moment to shell/support in PVElite
Replies
4
Views
441
imransaeed1804
imransaeed1804
H
  • Question
NACE Requirements for completely Cladded pressure vessel in severe sour stream
Replies
5
Views
2K
SJones
SJones
SmallInfo
  • Locked
  • Question
How to Design Test Ring for Heat Exchanger in PVELITE or Autopipe ? 1
Replies
3
Views
305
SmallInfo
SmallInfo
Ronak_Patel
  • Question
commercial software for design of pressure vessel and heat exchanger according to ASME SEC ||| for nuclear application.
Replies
1
Views
4K
MJCronin
MJCronin
JoshRanch
  • Locked
  • Question
How is sloshing accounted for in Pressure Vessels Seismic Considerations?
Replies
3
Views
3K
JoshRanch
JoshRanch

Part and Inventory Search

Sponsor

Back
Top Bottom