How to define a spring "Body-Ground" with 3 different stiffnesses ?

[Ezequiel1982]

Hi to all,

Does anyone could tell me how to define a spring "Body-Ground" with 3 different stiffnesses (X,Y,Z) in Ansys Workbench 145 ?.

The only option I´ve found is the spring with longitudinal stiffness..

Thanks in advance !

 

[inline6]

use 1 spring for each direction (PITA) or use a bush joint (also a bit of a PITA)

probably an APDL command might do the same but i avoid doing commands if i can work around it.